DJI - Authorized Dealer in Canada
Cart 0
Futaba 14SG + R7008SB HV Receiver FASSTest Radio System

Futaba 14SG + R7008SB HV Receiver FASSTest Radio System


$799.00 CAD

 

Futaba 14SG + R7008SB HV Receiver FASSTest Radio System - Futaba-Acc-14SG-R7008SB


FASSTest tech. Flybarless gyro support. S.Bus programmability. Telemetry.
The 14SG has it all. . . and more!
Futaba proudly introduces the 14SG, the only 14-channel system with revolutionary 2.4GHz FASSTest technology. It's also compatible with Futaba FASST and S-FHSS protocols, so you can fly with virtually any 2.4GHz air receiver Futaba produces.

The 14SG can transmit and receive telemetry data. Install Futaba telemetry sensors (sold separately) to monitor flight data, receive alerts while in flight and more. Heli pilots will prefer the 14SG's 3-axis gyro support — which makes the 14SG the perfect system for flybarless flight!

The innovations don't stop there. Turn the 14SG over, and you'll see the construction is as rock-solid as any other Futaba system. It's also very comfortable to use, thanks to rubber grips that help minimize flyer fatigue — an added bonus that pilots will appreciate.

The 14SG has so much to offer, we can't talk about everything here. To see everything that the 14SG can do, read on. . .



  14SG Super features :

  • Channels: 12 proportional, 2 switched
  • Compatible with FASSTest, FASST and S-FHSS protocols
  • FASSTest telemetry � compatible with Futaba telemetry sensors (sold separately)
  • Free user-updatable software 
  • 30-model memory 
  • 10-character user naming
  • 10-character model naming
  • Airplane, helicopter and glider programming
  • Large, 1.75� x 3� backlit LCD screen with 128 x 64 resolution
  • SensorTouch� programming
  • SD Card compatibility for external model memory and software updates (SD: 32MB-2GB; SDHC 4GB-32GB)
  • Left and right assignable slider switches
  • Two assignable rotary knobs
  • Six assignable three-position switches
  • One assignable momentary two-position switch
  • One assignable two-position switch
  • Comfortable rubber grips on the sides and back 
  • Wide top switch spacing
  • Adjustable stick tension
  • Dual ball bearing gimbals
  • 4 vibration warning types 
  • Home/Exit; User Menu/Servo Monitor buttons
  • Audio earphone jack (for telemetry alarms)
  • 6V 1800mAh NiMH battery pack
  • User stick calibration
  • Trainer system
  • Servo speed adjust
  • 5 programmable mixes
  • V-tail, Ailvator, winglet, motor mixing
  • Trim mix
  • Logic switch (condition switch only)
  • Internal programmer for S.Bus servos
  • User menu
  • Servo monitor (neutral and moving tests)
  • 2 count up/countdown timers
  • Integral timer
  • Model timer
  • Quick model select



Helicopter Features : 
  • 6 swash plate types
  • Pitch/throttle curves (5-point)
  • Throttle hold
  • Swash mix
  • Throttle mix
  • Pitch to rudder mixing
  • Fuel mixture
  • Gyro (Flybarless support)
  • Governor (700-3500 rpm)
  • Hover pitch
  • Hover throttle
  • High/low pitch
  • Swash AFR
  • Swash setting (mixing rate, linkage compensation, speed compensation)
  • Swash ring (electronic)
  • Throttle cut

Airplane Features : 
  • 7 different wing types
  • 3 different tail types
  • 2 different rudder types
  • Flap setting menu
  • Differential ailerons
  • Aileron to camber flap mixing
  • Aileron to brake flap mixing
  • Aileron to rudder mixing
  • Rudder to aileron mixing
  • Rudder to elevator mixing
  • Camber mixing
  • Elevator to camber mixing
  • Camber flap to elevator mixing
  • Snap roll mixing
  • Airbrake mixing
  • V-Tail mixing
  • Ailvator
  • Winglet
  • Motor mixing
  • Fuel mixture mixing
  • Gyro mixing
  • Throttle curve (5-point)
  • Pitch curve (5-point)
  • Idle down

Glider Features :
  • 11 different wing types
  • 3 different tail types
  • 2 different rudder types
  • Flap setting menu
  • Differential ailerons
  • Aileron to camber flap mixing
  • Aileron to brake flap mixing
  • Aileron to rudder mixing
  • Rudder to aileron mixing
  • Rudder to elevator mixing
  • Camber mixing
  • Elevator to camber mixing
  • Camber flap to elevator mixing
  • Butterfly mixing
  • Butterfly to elevator mixing


 




Here are just a few of the features that make the 8FG Super one of the most advanced flight system around!
Programming port & earphone jack
Rubber hand grips and adjustable gimbals
Wide switch spacing
Edit switches
Battery compartment/SD card slot
Balances perfectly
Home screen
Main telemetry screen
Servo speed screen
Modulation screen
User-configurable menu
Customizable quick select menu
Sensor warning setup menu
3-axis gyro menu
 
Governor menu
 


R7008SB 2.4GHz FASSTest Receiver for 14SG
Bi-directional communication with a FASSTest Futaba transmitter using the S.Bus2 port
Multiple optional telemetry sensors may be connected to the S.Bus2 port and the data displayed on the transmitter
Includes both standard PWM output ports and S.Bus output ports
Extra voltage port, 0-70V DC, the Extra Voltage connector needed for this is:
FUTM5551 CA-RVIN-700 EX VLT CBL

R7008SB Specifications :
  • SPECS: Receiving Frequency: 2.4GHz FASSTest system
  • Power Requirement: 3.7 - 7.4V (voltage range 3.5 - 8.4V)
  • Current drain: 75mA
  • Extra Voltage Port: 0 - 70V DC
  • Size: 0.98 x 1.9 x 0.56" (24.9 x 47.3 x 14.3mm)
  • Weight: 0.38oz (10.9g)


Package Comes with :
1 x Futaba 14SG 14ch 2.4GHz Transmitter 
1 x Futaba R7008SB 8ch 2.4GHz FASSTest S.Bus 2 Receiver
1 x Futaba HT5F1800B 6.0V 1800mAh NiMH Tx battery
1 x Futaba HBC-3C(4) Battery Charger
1 x Neck Strap
1 x On/Off Switch Harness, FUTM4385
1 x English Manual




Share this Product


More from this collection